Menu Close

HIllyard Multi-Flo XP Floor Finish System Complete

HIllyard Multi-Flo XP Floor Finish System

HIL50110

Multi-Flo® XP Floor Finish System Complete

Base unit, battery, charger, weights, clean out tube, B-I-B hookup. Plus, applicator head, one pad, and pump HIL50226.

SKU: HIL50110

Brochure

Call (212) 307-6600 to Order

 

 

 

SKU: HIL50110 Categories: , , , Tag:

Description

 

Improve Productivity

  • ​The Multi-Flo® XP is fast! Apply floor finish at rates up to 10,000 square feet per hour in open areas like hallways, gymnasiums, and multi-purpose rooms.
  • ​​​Apply finish in smaller rooms at a rate of 6,000 square feet per hour. That’s a typical 900 square foot classroom in less than 10 minutes.​

Easy-to-Use, Excellent Results

  • It’s in the design. Being in the floor coatings business for over 100 years has its advantages. Our coatings experience has led to a design that consistently delivers better results with minimal operator training.  Multi-Flo XP takes about the same amount of skill to operate as a push lawn mower. Easy-to-use, excellent results!​

Better Ergonomics & Safety

  • ​It’s just not natural body movement to push and pull a heavily saturated finish mop across the floor. The upper body is constantly moving, stretching, and reaching when applying finish with mops, backpack systems or gravity-​feed applicators.
  • ​​When using the Multi-Flo XP, the operator is in a more natural upright walking position.  The weight of the finish is distributed over four large casters, making it easy to position the applicator.​

Consistency

  • An independently weighted application head provides an optimum level of pressure to the applicator, consistently achieving specified coverage rates. The result is uniform coats of finish that make your floor look great – regardless of who is applying the finish.​
  • Traditional methods rely on the operators “touch and experience.”  The weight of gravity feed systems constantly changes as product is being applied, making it nearly impossible to achieve consistent, uniform coats.

 

Maneuverability

 

  • ​Four independent swivel castors allow for maximum maneuverability. It’s easy for an operator to get the Multi-Flo XP into tight corners, around pillars, or moving in a straight line.​
  • The articulating handle gives the operator complete control and the freedom to perfectly position the Multi-Flo XP in the tightest spots.

 

Multiple Container Options

 

  • Bag-in-box, 5 gallon buckets, 2.5 and 1 gallon containers, the Multi-Flo XP accommodates them all! One applicator. Multiple containers. Many surfaces. Multi-Flo XP just makes sense!
  • ​Select from any Hillyard high-performance finish or sealer and it will work with the Multi-Flo XP.

 

Battery-Operated Pump

 

  • The battery-​operated pump system quickly dispenses finish. At the touch of a button, saturate the application head and keep a consistent “well” of finish to maintain a wet edge – a key to avoiding streaks and achieving better results.
  • ​Easy to access, yet protected, charger port.  Simply plug in your charger to recharge your battery-operated system.

 

Simple Cleanup

 

  • Unlike mops and buckets, backpack systems, and gravity feed applicators, Multi-Flo XP is easy to clean.
  • ​​Use finish right out of its own container.  There are no extra buckets, reservoirs,  or special backpacks to fill, clean, or transfer left-over finish from.  If there is left-over finish with the Multi-Flo XP, just put the cap back on the container.

  • ​A very short run of  large diameter tubing is easily flushed clean. For water-based finishes, a small amount of water is circulated through the pump. Solvent-based finishes require a solvent rinse.

 

Add the Optional SOLUTIONTANK

 

  • ​Turn The Multi-Flo XP  into the Total Floor Care Solution!

 

Clean

 

  • Multi-Flo XP is for more than just restorative projects – use it for everyday cleaning!
  • Fresh cleaning solution is applied to the leading edge of the floor pad at the touch of a button delivering superior cleaning results.
  • Fast and efficient with a wide 30″ path.

 

Strip

 

  • The safe alternative to a process that is inherently slick and slippery.
  • Apply and agitate stripping solution without “stepping in it.”
  • Fast and efficient with a wide 30″ path.
  • The applicator head has risers that lift the pad off the floor providing the optimum combination of saturation, agitation, and dwell time.

 

Carpet Pre-Spray

 

  • Unlike pump-up sprayers, the carpet pre-spray system provides consistent, uniform and complete coverage of the carpet surface resulting in superior cleaning results.
  • High-volume, wide 30″ spray pattern delivers greater productivity.​​